Questions? Email Us or call (888)-657-9997
(Hours: M-F 8am - 6pm Central)

  • Friend Us on Facebook
  • Follow Us on Twitter
  • Watch Us on YouTube
Free Shipping Limited Lifetime Warranty

Winch Rigging: Straight Line Pull

Winching Tip of the Week from ProMark Offroad

16K Snatch Block

Use a snatch block to straighten the pull as needed.

Winching Tip of the Week: Always avoid continuous side pulls. The rope can pile up on one side of the drum, possibly damaging your winch or rope.

a

Try to rig up the pull so that the recovery vehicle or anchor point is directly in line with the stuck vehicle. Make the pull as straight as possible, and any angle pulls should be no more than about 30 degrees to either side. With a straight pull, the rope should spool evenly and neatly from side to side on the drum.

If the winch rope begins to pile up on one side of the drum or gets tangled up, stop winching and spool the line back out. Re-spool the line in straight and even rows; then continue winching.

If you get stuck in a situation where a straight line pull is impossible, use a snatch block to redirect the line. A snatch block lets you change the pulling direction and guide the rope straight into the winch.

Tags: , ,

  • http://www.promarkoffroad.com/blog/pinched-winch-cable/ Pinched Winch Cable « ProMark Offroad Blog

    [...] binding and pinching can happen for a number of reasons, for example, an off-kilter pull, loose wraps on the drum, or other improper winching techniques. In any of these cases, strands of [...]