Big thanks to one of our customers for sending us the link to a winch install video that he posted on Photobucket. The video features a 1978 Jeep CJ-7 with a 10,000 lb ProMark Silverback winch and custom mount plate fitting.
The videos and photos posted by FJguercio describe in detail the form and fit for the Jeep winch and mount plate. See one of the videos below.
Jeep CJ with 10K Silverback ProMark winch
Thanks to one of our customers for sending in this picture of a ProMark 3000 lb XTR winch with synthetic rope installed on the front of his Linhai 300cc Bighorn UTV! We think it looks pretty darn good…and the ProMark sticker is a nice touch, of course.
Bighorn UTV with a 3000 lb ProMark winch
A proud Foreman owner posted photos of his Rancher 420 with a ProMark 2500 lb winch on the HondaForeman.com forum. Commenting on the fit and quality of the ATV winch, he said, “The fit is good, very tight. With the wheel full locked there is about 2 inches of clearance between the winch and the left tire. I have tried it out by pulling the bike up a decent slope and it did great. It wasn’t even warm when I touched it after I was done.” See the pictures below!
Winch installed on a Rancher 420
Side view of winch
Front and side view
Wireless remote
Take a look at these pictures from a customer who bought a 10,000 lb ProMark winch and 2″ multi mount for his Jeep Commander. The Jeep owner used a quick connect setup that allows him to remove the winch and mount when they are not being used. The photos were originally posted on JeepCommander.com.
10,000 lb Jeep winch
Comes with all accessories (except the dog)
2 inch multimount receiver
Winch and multimount setup with quick connect wiring
Winch mounted on Jeep Commander
Front view of Jeep winch and mount
Offroad riding in the snow is an adventure! Thanks to one of our customers for submitting this photo of his UTV (“Big Bird”) about to get winched out with a ProMark Offroad UTV winch.
Big Bird stuck in the snow
The Rockster Jeep build by River Raider is out of the shop and ready to wheel! ProMark Offroad is a proud sponsor of the Rockster Jeep build, featuring a ProMark Jeep winch, synthetic winch rope, and aluminum fairlead. The new rig features a 6.2 liter Cadillac Escalade motor, laid-back windshield, custom roll cage, 3/16″ aluminum body panels, and 40″ tires, just to name a few.
Check out the video below. You can see more pictures at JK-Adventure.com.
Finished Rockster project. Picture taken by JK-Adventure.com.
How well do ProMark winches work in extreme situations? One of our customers, Tim Mayville, took his 4000 lb XT winch to the extreme by pulling out a Chevy Blazer buried in mud. His reaction to the ATV winch’s performance? “Really strong winch!!!”
Here is more of what Tim had to say about his dual winch and wireless setup:
“I am making some changes to my setup… Using the rear setup a lot more.
The rear of my Arctic Cat ATV (ProMark 4000 XT) gets a good workout from time to time.
I have a set of pictures here of me pulling a car out of a mud hole… a Chevy Blazer.
My ATV has pretty good traction but, we had to use block and strap around a tree to get enough support as well as back my ATV into another tree… The 4000 XT pulled the vehicle up no problem – I feared it would break the cable so, we just raised it enough for us to keep putting logs under it so it would empty the water out of the cab of the SUV, which was full of water.
Took a little while, letting the battery and all rest, but we got the guy out.
Really strong winch!!!”
Chevy Blazer stuck in a mud hole
Blazer ready to be winched out by an Arctic Cat 700
ProMark 4000 XT winch hooked up to the Blazer
Blazer winched out by a 4000 lb XT winch on an Arctic Cat ATV
Tim also sent these pictures of his Arctic Cat 700, just for fun:
Arctic Cat 700 with dual ProMark winches and wireless setup
Riding through a mud hole with the Arctic Cat 700
Enough work for one day. Time to play around!
The Rockster Jeep build by River Raider Off-Road is fast approaching its debut at the Pomona Off Road Expo in October. ProMark Offroad is sponsoring the build with a ProMark Jeep winch and synthetic winch line. Get a look at the progress in the pictures below. More details and pictures are available at the JKOwners forum.
Paint job (rear view)
Front bumper with fairlead, where the ProMark winch will be
Pictured Below: “Just to get a better idea of what the finished project will look like, we rolled a couple of 37′s from one of Rock Krawlers’ other projects next to her.”
Pictured with 37's for a better idea of what the finished project will look like
After the Rockster made a side trip to Rock Krawlers for suspension work, Jeremy from Rock Krawlers updated the forum on the suspension and what would happen next:
“The ‘Rockster’ is finally heading out west! Actually, it looks awesome without the soft top on it! Kenny did a great job with the cage! Twisted Stitch will be redoing the top when it gets to Cali!
It has a 2.5″ Long Arm System with 3.5″ of stretch. We are actually planning on on offering this as a production system for 2 doors at a 2.5″ and 3.5″ lift height. The frame has been cleaned up from its years of travel on the East Coast!
Here are a few images of it back on the stock tires and wheels! Once it gets out west it is going to Todd and The Jeep Speed Shop where a Dana 60 front and Corp 14 bolt rear will be slid underneath it. Poly Performance is welding on all the axle brackets so the old school axles will bolt right up. RWK Haus Supply is building the axles stuffed with High Quality Yukon Products.
While at the Jeep Speed Shop an LS engine swap will also take place! By the time it leaves the Jeep Speed Shop it will be on Race Line Wheels and 40″ Tires!
The Rockster is missing shocks and bumps for now! Fox shocks and air bumps will be installed to handle the dampening duties and control the high speed up travel of the massive 40′s and heavy axles. Stay tuned for final assembly pictures. The ‘Rockster’ will also be in our booth at the Pomona Offroad Expo with the Top Off unless it is raining.
Great Work Kenny! Now it is off to the next phase! Good Luck to Todd at Jeep Speed Shop and the rest of the guys finishing up the ‘Rockster.’”
Rockster with new suspension
Rock Krawler suspension
Next stop: Jeep Speed Shop for an LS3 motor!
LS3 engine
Here’s a sneak peek at the new tires–coming soon!
Rockster Tires
ProMark Offroad is sponsoring River Raider for their new Rockster Jeep build. The Rockster project is based off a 2007 2-door JK platform and will be sporting a ProMark Jeep winch with synthetic rope and aluminum fairlead, hidden behind a custom front bumper.
Some of the goodies to expect on the aggressive Rockster build include:
Here are a few sneak peeks of this work in progress from River Raider Off Road. You can get the latest updates from Kenny on the JKOwners forum.
Mockup of the finished Rockster build
Tearing down the 2007 JK
Prep work for the custom rear bumper
Laid back windshield
Custom cage
Driving to the paint shop
Waiting for a new paint job
Take a look at these offroad winching photos from our ProMark customers! Thanks to Dennis and Shaun for submitting these pictures.
Dennis winching out of a steep ditch
Midnight Series 10,000 lb winch in action
Shaun and his sons out on an elk hunt
Submit your own photos to media@promarkoffroad.com!
By purchasing a promark offroad product, you have acknowledged that you have read and agree with our "terms of use".
*free shipping applies to lower 48 contiguous united states only.
© 2010 ProMark Offroad All Rights Reserved.
